- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
BMS 4S 60A LFP(ZP04S016) (79cc)
BMS 4S 60A
The BMS LFP 4S 60A JBD (ZP04S016) is a Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 60A continuous discharge current. It is ideal for moderate-power applications such as energy storage systems, electric vehicles, and backup power solutions. The BMS provides essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the safe and reliable operation of the battery.
Battery Pack, – 12V 18AH Lithium phosphate
Battery pack
Specification - 4S3P LFP
Charge Cycle with full Capacity - 2500~3000 aprox
BMS Specification - 4s10A LFP
Maximum Capacity - 18AH or 18000 mah
Max discharge current - 10A
Battery Voltage - 12v
maximum power from battery - 180watts
Charging Specification -
Fast charging Supports. Use only lithium Iron Phosphate Charger to charge this battery. Charging Voltage should be 14~15v
Nickel Strip, for 32650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
26650 5000mah 3.6 Volt HLY Li Ion Battery Cells
FOR BULK ENQUIRY CALL- 9541115858
The HLY 26650 5000mAh 3.6V Lithium Ion Rechargeable Battery Cell is a high-capacity, energy-dense power source designed for various high-drain applications. this cell offers a substantial capacity of 5000mAh, providing extended runtimes in devices such as flashlights, power tools, electric vehicles, and other portable electronics.
Nickel Strip, for 18650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
Reviews
There are no reviews yet.