- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
“Drone battery Rechargeable Lithium Polymer Battery, 3.7V, 400mAh” has been added to your cart. View cart
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Categories: Battery accesories, BMS- JBD, Hi Cell Bettery
Tags: 8s 20amp, BATTERY MANAGEMENT SYSTEM, BMS, JBD
Description
Reviews (0)
Be the first to review “8S 20AMP JBD BMS LFP Hardware (HP16SA)” Cancel reply
Related products
Drone battery Rechargeable Lithium Polymer Battery, 3.7V, 400mAh
₹285.00
EVE 105Ah 3.2V PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (Pack of 16)
₹48,500.00
Rechargeable Lithium Polymer Battery, 3.7V, 500mAh, 3cm x 2cm, (modal-502030)
₹230.00
Lithium Phosphate Battery / 32650, 32700 , 6000mAh 3.2V (3C)
₹225.00
3.2V 230Ah, EVE lithium cell- PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE
Rechargeable Lithium Polymer Battery, 3.7v 10000mah/10Ah -1260110
₹450.00
24V15Ah LiFePO4 Battery Pack with BMS Protection
₹6,100.00
24V 15Ah Life Po4 Lithium Phosphate Battery pack Applications: Solar and wind power system, RV, Caravan etc. Back-up system and UPS. Important: Buyers should be familiar with the safe use of lithium battery and installation. Advantages of LiFePO4 Batteries over Lead Acid: 40% lighter than Lead Acid. Can last up to 15 years or more if used properly. Have a 100% usable capacity while Lead acid Batteries have only 40~60% usable capacity. Installation Notes: Customers should install a compatible inverter with the battery.
12 Volt Rechargeable Battery 18650 Lithium
₹415.00 – ₹560.00Price range: ₹415.00 through ₹560.00

Reviews
There are no reviews yet.