- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
24V15Ah LiFePO4 Battery Pack with BMS Protection
24V 15Ah Life Po4 Lithium Phosphate Battery pack Applications: Solar and wind power system, RV, Caravan etc. Back-up system and UPS. Important: Buyers should be familiar with the safe use of lithium battery and installation. Advantages of LiFePO4 Batteries over Lead Acid: 40% lighter than Lead Acid. Can last up to 15 years or more if used properly. Have a 100% usable capacity while Lead acid Batteries have only 40~60% usable capacity. Installation Notes: Customers should install a compatible inverter with the battery.
12V 100Ah Pack with BMS Protection Lithium Phosphate Battery, Life Po4 (WITH SMART BLUETOOTH BMS)
Lithium Phosphate Battery : A 12V 100Ah battery is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge. Available in lead-acid or lithium-ion types, it offers a balance between energy storage and discharge duration, making it ideal for reliable, long-lasting power in various setups.
Nickel Strip, for 18650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
Reviews
There are no reviews yet.