- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
12V 100Ah Pack with BMS Protection Lithium Phosphate Battery, Life Po4 (WITH SMART BLUETOOTH BMS)
Lithium Phosphate Battery : A 12V 100Ah battery is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge. Available in lead-acid or lithium-ion types, it offers a balance between energy storage and discharge duration, making it ideal for reliable, long-lasting power in various setups.
Nickel Strip, for 18650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
100Ah 3.2V, PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (DIY BATTERY KIT) 4S 100Amp JBD BMS, BUSBAR, NUT
4 CELLS, JBD BMS 4S 100AMP, NUT, BUSBAR
A 3.2V 100Ah Lithium Iron Phosphate (LiFePO4) battery is a high-capacity energy storage solution commonly used in various applications, including renewable energy systems, electric vehicles, and other high-demand devices requiring a reliable and long-lasting power source.
26650 5000mah 3.6 Volt HLY Li Ion Battery Cells
FOR BULK ENQUIRY CALL- 9541115858
The HLY 26650 5000mAh 3.6V Lithium Ion Rechargeable Battery Cell is a high-capacity, energy-dense power source designed for various high-drain applications. this cell offers a substantial capacity of 5000mAh, providing extended runtimes in devices such as flashlights, power tools, electric vehicles, and other portable electronics.
Reviews
There are no reviews yet.