- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
100Ah 3.2V, PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (DIY BATTERY KIT) 4S 100Amp JBD BMS, BUSBAR, NUT
4 CELLS, JBD BMS 4S 100AMP, NUT, BUSBAR
A 3.2V 100Ah Lithium Iron Phosphate (LiFePO4) battery is a high-capacity energy storage solution commonly used in various applications, including renewable energy systems, electric vehicles, and other high-demand devices requiring a reliable and long-lasting power source.
24V100Ah-Life PO4 Lithium Phosphate Battery
Battery For Inverter - Life Po4 24V, 100Ah is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge.
Battery Pack, – 12V 18AH Lithium phosphate
Battery pack
Specification - 4S3P LFPCharge Cycle with full Capacity - 2500~3000 aproxBMS Specification - 4s10A LFPMaximum Capacity - 18AH or 18000 mahMax discharge current - 10ABattery Voltage - 12vmaximum power from battery - 180wattsCharging Specification -Fast charging Supports. Use only lithium Iron Phosphate Charger to charge this battery. Charging Voltage should be 14~15v
Lithium Phosphate Battery Pack, 12V15Ah Life Po4 with BMS protection
This Lithium Phosphate Battery pack is constructed using high-quality 3.2V 15Ah cells, designed to deliver reliable and long-lasting power for various applications. Each cell provides a nominal voltage of 3.2 volts and a capacity of 15 amp-hours, ensuring a substantial energy reserve for devices that require consistent power over extended periods. The battery pack is typically configured in a series or parallel arrangement to meet the desired voltage and capacity specifications, making it suitable for applications such as electric vehicles (EVs), solar energy storage, and high-capacity power systems.Incorporating advanced battery management systems (BMS), the pack ensures safe charging and discharging cycles, protects against overcharge, over-discharge, and short circuits, and optimizes performance and lifespan. With its high energy density and efficiency, this battery pack is a reliable solution for powering demanding systems while maintaining a lightweight and compact form factor.
BMS 4S 60A LFP(ZP04S016) (79cc)
BMS 4S 60AThe BMS LFP 4S 60A JBD (ZP04S016) is a Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 60A continuous discharge current. It is ideal for moderate-power applications such as energy storage systems, electric vehicles, and backup power solutions. The BMS provides essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the safe and reliable operation of the battery.
26650 5000mah 3.6 Volt HLY Li Ion Battery Cells
FOR BULK ENQUIRY CALL- 9541115858
The HLY 26650 5000mAh 3.6V Lithium Ion Rechargeable Battery Cell is a high-capacity, energy-dense power source designed for various high-drain applications. this cell offers a substantial capacity of 5000mAh, providing extended runtimes in devices such as flashlights, power tools, electric vehicles, and other portable electronics.
Reviews
There are no reviews yet.