- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
24V100Ah-Life PO4 Lithium Phosphate Battery
Battery For Inverter - Life Po4 24V, 100Ah is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge.
Battery Pack, – 12V 18AH Lithium phosphate
Battery pack
Specification - 4S3P LFP
Charge Cycle with full Capacity - 2500~3000 aprox
BMS Specification - 4s10A LFP
Maximum Capacity - 18AH or 18000 mah
Max discharge current - 10A
Battery Voltage - 12v
maximum power from battery - 180watts
Charging Specification -
Fast charging Supports. Use only lithium Iron Phosphate Charger to charge this battery. Charging Voltage should be 14~15v
100Ah 3.2V, PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (DIY BATTERY KIT) 4S 100Amp JBD BMS, BUSBAR, NUT
4 CELLS, JBD BMS 4S 100AMP, NUT, BUSBAR
A 3.2V 100Ah Lithium Iron Phosphate (LiFePO4) battery is a high-capacity energy storage solution commonly used in various applications, including renewable energy systems, electric vehicles, and other high-demand devices requiring a reliable and long-lasting power source.
Reviews
There are no reviews yet.