- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 10A
- Continuous discharging current: 20A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°C8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
- 8S 20AMP
8S 20AMP JBD BMS LFP Hardware (HP16SA)
₹850.00
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Description
Related products
12V 105Ah, EVE – Life Po4 with BMS Protection (Normal BMS)
A 12V 105Ah battery is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 105 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge. Available in lead-acid or lithium-ion types, it offers a balance between energy storage and discharge duration, making it ideal for reliable, long-lasting power in various setups.
Lithium Phosphate Battery
Nickel Strip, for 18650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
Lithium Phosphate Battery Pack, 12V15Ah Life Po4 with BMS protection
This Lithium Phosphate Battery pack is constructed using high-quality 3.2V 15Ah cells, designed to deliver reliable and long-lasting power for various applications. Each cell provides a nominal voltage of 3.2 volts and a capacity of 15 amp-hours, ensuring a substantial energy reserve for devices that require consistent power over extended periods. The battery pack is typically configured in a series or parallel arrangement to meet the desired voltage and capacity specifications, making it suitable for applications such as electric vehicles (EVs), solar energy storage, and high-capacity power systems.Incorporating advanced battery management systems (BMS), the pack ensures safe charging and discharging cycles, protects against overcharge, over-discharge, and short circuits, and optimizes performance and lifespan. With its high energy density and efficiency, this battery pack is a reliable solution for powering demanding systems while maintaining a lightweight and compact form factor.
BMS 4S 60A LFP(ZP04S016) (79cc)
BMS 4S 60AThe BMS LFP 4S 60A JBD (ZP04S016) is a Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 60A continuous discharge current. It is ideal for moderate-power applications such as energy storage systems, electric vehicles, and backup power solutions. The BMS provides essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the safe and reliable operation of the battery.
15Ah 3.2V 32140 LiFePO4 Cylindrical Rechargeable Lithium Battery Cells by CBAK
The 15Ah 3.2V, 32140, 48Wh LiFePO4 cylindrical rechargeable lithium battery cells from CBAK offer a high-performance and safe energy solution for a wide range of applications. With a nominal voltage of 3.2V and a capacity of 15Ah, these cells provide reliable, long-lasting power with an energy density of 48Wh per cell. Known for their excellent thermal stability, long cycle life (up to 2000-3000 cycles), and low self-discharge rate, these cells are ideal for electric vehicles, energy storage systems, portable power banks, and other energy-intensive applications. Their compact cylindrical design (32mm x 140mm) ensures easy integration into battery packs. Additionally, LiFePO4 chemistry is environmentally friendly and safe, making these cells an excellent choice for both commercial and industrial use.
Reviews
There are no reviews yet.