- Cell specifications: 8 strings of lithium iron batteries
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.0~3.75V
- Continuous charging current: 20A
- Continuous discharging current: 40A
- Consumption of running: ≤50uA
-Circuit resistance: ≤20mR - Operating temperature: -30°C-75°CThe 8S 40A BMS LFP JBD (HP08S001) is a Battery Management System (BMS) designed for 8 series lithium iron phosphate (LiFePO4) battery packs, supporting a 40A continuous discharge current. It is suitable for moderate power applications such as small electric vehicles, energy storage systems, and backup power solutions. The 8S 40A BMS LFP JBD offers comprehensive protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature protection, ensuring the safe and efficient operation of the battery. Additionally, the HP08S001 model includes cell balancing to maintain consistent voltage across all cells, optimizing battery performance and extending its lifespan.
8S 40A BMS LFP JBD (HP08S001) (74c4)
₹1,200.00
The 8S 40A BMS LFP JBD (HP08S001) is a Battery Management System (BMS) designed for 8 series lithium iron phosphate (LiFePO4) battery packs, supporting a 40A continuous discharge current. It is suitable for moderate power applications such as small electric vehicles, energy storage systems, and backup power solutions. The 8S 40A BMS LFP JBD offers comprehensive protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature protection, ensuring the safe and efficient operation of the battery. Additionally, the HP08S001 model includes cell balancing to maintain consistent voltage across all cells, optimizing battery performance and extending its lifespan.
Description
Related products
Battery Pack, – 12V 18AH Lithium phosphate
Battery pack
Specification - 4S3P LFP
Charge Cycle with full Capacity - 2500~3000 aprox
BMS Specification - 4s10A LFP
Maximum Capacity - 18AH or 18000 mah
Max discharge current - 10A
Battery Voltage - 12v
maximum power from battery - 180watts
Charging Specification -
Fast charging Supports. Use only lithium Iron Phosphate Charger to charge this battery. Charging Voltage should be 14~15v
Nickel Strip, for 32650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
24V15Ah LiFePO4 Battery Pack with BMS Protection
24V 15Ah Life Po4 Lithium Phosphate Battery pack Applications: Solar and wind power system, RV, Caravan etc. Back-up system and UPS. Important: Buyers should be familiar with the safe use of lithium battery and installation. Advantages of LiFePO4 Batteries over Lead Acid: 40% lighter than Lead Acid. Can last up to 15 years or more if used properly. Have a 100% usable capacity while Lead acid Batteries have only 40~60% usable capacity. Installation Notes: Customers should install a compatible inverter with the battery.
24V100Ah-Life PO4 Lithium Phosphate Battery
Battery For Inverter - Life Po4 24V, 100Ah is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge.
Reviews
There are no reviews yet.