- Cell specifications: 8S strings of Lithium Iron Battery
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.2~3.75V
- Continuous charging current: current): 50A
- Continuous discharging current: 100A
- Consumption of running: ≤100uA
-Circuit resistance: ≤10mR - Operating temperature: -20°C~75°C 8S 100A LFP BMS JBD-ZP10S036 is a hardware protection board solution specially designed for 6-10 lithium battery packs. The protection parameters are fixed by the component parameters. The product supports the drop line protection function.
8S 100A LFP BMS (ZP10S036) (76b9)
₹1,850.00
8S 100A LFP BMS JBD-ZP10S036 is a hardware protection board solution specially designed for 6-10 lithium battery packs. The protection parameters are fixed by the component parameters. The product supports the drop line protection function.
Description
Related products
24V100Ah-Life PO4 Lithium Phosphate Battery
Battery For Inverter - Life Po4 24V, 100Ah is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge.
8S 40A BMS LFP JBD (HP08S001) (74c4)
The 8S 40A BMS LFP JBD (HP08S001) is a Battery Management System (BMS) designed for 8 series lithium iron phosphate (LiFePO4) battery packs, supporting a 40A continuous discharge current. It is suitable for moderate power applications such as small electric vehicles, energy storage systems, and backup power solutions. The 8S 40A BMS LFP JBD offers comprehensive protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature protection, ensuring the safe and efficient operation of the battery. Additionally, the HP08S001 model includes cell balancing to maintain consistent voltage across all cells, optimizing battery performance and extending its lifespan.
BMS 4S 120A LFP (ZP04S014) (7d3c)
BMS 4S 120Amp
The BMS LFP 4S 120A JBD (ZP04S016) is a Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 120A continuous discharge current. It is ideal for moderate-power applications such as energy storage systems, electric vehicles, and backup power solutions. The BMS provides essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the safe and reliable operation of the battery.
BMS 4S 50A LFP (ZP04S014) (79da)
BMS 4S 50Amp
The BMS 4S 50A LFP (ZP04S014) (79da) is a Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 50A continuous discharge current. It is ideal for moderate-power applications such as energy storage systems, electric vehicles, and backup power solutions. The BMS provides essential protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the safe and reliable operation of the battery.
8S 20AMP JBD BMS LFP Hardware (HP16SA)
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Lithium Phosphate Battery Pack, 12V15Ah Life Po4 with BMS protection
This Lithium Phosphate Battery pack is constructed using high-quality 3.2V 15Ah cells, designed to deliver reliable and long-lasting power for various applications. Each cell provides a nominal voltage of 3.2 volts and a capacity of 15 amp-hours, ensuring a substantial energy reserve for devices that require consistent power over extended periods. The battery pack is typically configured in a series or parallel arrangement to meet the desired voltage and capacity specifications, making it suitable for applications such as electric vehicles (EVs), solar energy storage, and high-capacity power systems.
Incorporating advanced battery management systems (BMS), the pack ensures safe charging and discharging cycles, protects against overcharge, over-discharge, and short circuits, and optimizes performance and lifespan. With its high energy density and efficiency, this battery pack is a reliable solution for powering demanding systems while maintaining a lightweight and compact form factor.
BMS 4S 150A LFP (ZP04S016) (7d3d)
BMS 4S 150A (ZP04S016) (7d3d)
The BMS LFP 4S 150A JBD (ZP04S016) is a robust Battery Management System (BMS) designed for 4 series lithium iron phosphate (LiFePO4) battery packs, supporting a 150A continuous discharge current. It is ideal for moderate-to-high power applications such as electric vehicles, energy storage systems, and backup power solutions. The BMS offers critical protection features, including overcharge, over-discharge, overcurrent, short circuit, and temperature management, ensuring the battery's safe operation. The ZP04S016 model also incorporates cell balancing to maintain uniform voltage across all cells, optimizing performance and extending battery lifespan, while providing real-time monitoring for efficient battery management.
Reviews
There are no reviews yet.