100Ah 3.2V, PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (DIY BATTERY KIT) 4S 100Amp JBD BMS, BUSBAR, NUT
4 CELLS, JBD BMS 4S 100AMP, NUT, BUSBAR
A 3.2V 100Ah Lithium Iron Phosphate (LiFePO4) battery is a high-capacity energy storage solution commonly used in various applications, including renewable energy systems, electric vehicles, and other high-demand devices requiring a reliable and long-lasting power source.
10S 20A BMS NMC JBD (HP16SA) (5656)
10S 20A BMS NMC JBD (HP16SA) (5656) HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
11S 20AMP LFP BMS JBD Hardware (HP16SA)
11S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
12 Volt Rechargeable Battery 18650 Lithium
1200mah/2000mah/2600mah, 7.4 Volt Rechargeable Battery, Lithium Ion 2 x 18650 Double Cell Battery Holder
12V 100Ah Pack with BMS Protection Lithium Phosphate Battery, Life Po4 (WITH SMART BLUETOOTH BMS)
Lithium Phosphate Battery : A 12V 100Ah battery is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 100 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge. Available in lead-acid or lithium-ion types, it offers a balance between energy storage and discharge duration, making it ideal for reliable, long-lasting power in various setups.
12V 105Ah, EVE – Life Po4 with BMS Protection (Normal BMS)
A 12V 105Ah battery is a high-capacity rechargeable power source commonly used for applications like solar power storage, RVs, boats, and off-grid systems. With a 105 amp-hour (Ah) capacity, it can deliver 1 amp of current for 100 hours or 10 amps for 10 hours before requiring a recharge. Available in lead-acid or lithium-ion types, it offers a balance between energy storage and discharge duration, making it ideal for reliable, long-lasting power in various setups.
Lithium Phosphate Battery
12V 20Ah Li-ion Battery with Deep Cycles and BMS Protection(Rechargeable) BIS Approved Batteries Used
12V100Ah LIFEPO4 Battery
12V100AH
#CAR BATTERY
| Parameter | Specification |
|---|---|
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Nominal Voltage | 12.8V (4S configuration) |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Cell Type | Grade A EVE prismatic cells |
| BMS (Battery Management System) | 200A continuous discharge, hardware type |
| Cycle Life | 3500+ cycles @ 80% DOD |
| Continuous Discharge Current | 200A |
| Peak/Surge Discharge Current | 400A (for 5–10 sec, suitable for car starting) |
| Recommended Charge Voltage | 14.4V ± 0.2V |
| Cut-off Voltage | 10.0V |
| Charge Current (Recommended) | 50A |
| Max Charge Current | 100A |
| Operating Temperature (Discharge) | -20°C to +60°C |
| Operating Temperature (Charge) | 0°C to +55°C |
| Weight | ~11–12 kg (depending on case design) |
| Dimensions (L×W×H) | Approx. 330 × 175 × 220 mm (can be adjusted based on case) |
| Case Material | Metal |
