Cell specifications: 23 strings of lithium iron batteries
Interface type: Charge and discharge are both at the same port
charging voltage: 3.6V*Number of strings
Cell voltage range: 2.0~3.75V
Continuous charging current: current): 50A
Continuous discharging current: 50A
Consumption of running: ≤50uA
-Circuit resistance: ≤20mR
Operating temperature: -20°C~75°C
LFP 23S 50A JBD (HP24SA) (77ee)
₹2,693.00
JBD-HP24SA is a Hardware protection board scheme specially designed for 7-24 strings of lithium battery packs. The protection parameters are fixed by the component parameters.
Description
Related products
Nickel Strip, for 18650 for Spot Welding (1 kg)
This product directly from raw materials of high purity nickel plate rolling, more than 99.96% of nickel content, with a guarantee of high purity nickel, low-resistance (15% lower than the traditional process so), to avoid the traditional craft materials in the smelting process of adding resulting decrease of nickel with purity, resistance increases the defect, this method does not change the chemical composition of energy nickel plate.
CAR BATTERY-12V100Ah LIFEPO4 Battery Pack
| Parameter | Specification |
|---|---|
| Battery Type | LiFePO4 (Lithium Iron Phosphate) |
| Nominal Voltage | 12.8V (4S configuration) |
| Nominal Capacity | 100Ah |
| Energy | 1280Wh |
| Cell Type | Grade A EVE prismatic cells |
| BMS (Battery Management System) | 200A continuous discharge, hardware type |
| Cycle Life | 3500+ cycles @ 80% DOD |
| Continuous Discharge Current | 200A |
| Peak/Surge Discharge Current | 400A (for 5–10 sec, suitable for car starting) |
| Recommended Charge Voltage | 14.4V ± 0.2V |
| Cut-off Voltage | 10.0V |
| Charge Current (Recommended) | 50A |
| Max Charge Current | 100A |
| Operating Temperature (Discharge) | -20°C to +60°C |
| Operating Temperature (Charge) | 0°C to +55°C |
| Weight | ~11–12 kg (depending on case design) |
| Dimensions (L×W×H) | Approx. 330 × 175 × 220 mm (can be adjusted based on case) |
| Case Material | Metal |
BMS LFP 4S 60A DALY (1185)
The Daly BMS LFP 4S 60A Waterproof is a cutting-edge Battery Management System (BMS) designed for Lithium Iron Phosphate (LiFePO4) battery packs. This 4S (4-cell series) BMS ensures the highest level of safety and efficiency by protecting against overcharge, over-discharge, short circuits, and temperature fluctuations. With its IP65 waterproof rating, this BMS is suitable for marine, solar, electric vehicle (EV), and off-grid applications.
BMS LFP 4S 50A DALY (11b4)
The Daly BMS LFP 4S 50A Waterproof is a cutting-edge Battery Management System (BMS) designed for Lithium Iron Phosphate (LiFePO4) battery packs. This 4S (4-cell series) BMS ensures the highest level of safety and efficiency by protecting against overcharge, over-discharge, short circuits, and temperature fluctuations. With its IP65 waterproof rating, this BMS is suitable for marine, solar, electric vehicle (EV), and off-grid applications.
Reviews
There are no reviews yet.