- Cell specifications: 8S strings of Lithium Iron Battery
- Interface type: Charge and discharge are both at the same port
- charging voltage: 3.6V*Number of strings
- Cell voltage range: 2.2~3.75V
- Continuous charging current: current): 50A
- Continuous discharging current: 100A
- Consumption of running: ≤100uA
-Circuit resistance: ≤10mR - Operating temperature: -20°C~75°C 8S 100A LFP BMS JBD-ZP10S036 is a hardware protection board solution specially designed for 6-10 lithium battery packs. The protection parameters are fixed by the component parameters. The product supports the drop line protection function.
8S 100A LFP BMS (ZP10S036) (76b9)
₹1,850.00
8S 100A LFP BMS JBD-ZP10S036 is a hardware protection board solution specially designed for 6-10 lithium battery packs. The protection parameters are fixed by the component parameters. The product supports the drop line protection function.
Description
Related products
11S 20AMP LFP BMS JBD Hardware (HP16SA)
11S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
24V15Ah LiFePO4 Battery Pack with BMS Protection
24V 15Ah Life Po4 Lithium Phosphate Battery pack Applications: Solar and wind power system, RV, Caravan etc. Back-up system and UPS. Important: Buyers should be familiar with the safe use of lithium battery and installation. Advantages of LiFePO4 Batteries over Lead Acid: 40% lighter than Lead Acid. Can last up to 15 years or more if used properly. Have a 100% usable capacity while Lead acid Batteries have only 40~60% usable capacity. Installation Notes: Customers should install a compatible inverter with the battery.
15Ah 3.2V 32140 LiFePO4 Cylindrical Rechargeable Lithium Battery Cells by CBAK
The 15Ah 3.2V, 32140, 48Wh LiFePO4 cylindrical rechargeable lithium battery cells from CBAK offer a high-performance and safe energy solution for a wide range of applications. With a nominal voltage of 3.2V and a capacity of 15Ah, these cells provide reliable, long-lasting power with an energy density of 48Wh per cell. Known for their excellent thermal stability, long cycle life (up to 2000-3000 cycles), and low self-discharge rate, these cells are ideal for electric vehicles, energy storage systems, portable power banks, and other energy-intensive applications. Their compact cylindrical design (32mm x 140mm) ensures easy integration into battery packs. Additionally, LiFePO4 chemistry is environmentally friendly and safe, making these cells an excellent choice for both commercial and industrial use.
8S 20AMP JBD BMS LFP Hardware (HP16SA)
8S 20AMP JBD BMS HP16SA is a Hardware protection board scheme specially designed for 4 -16 strings of lithium battery packs. The protection parameters are fixed by the component parameters. BMS The protection board should be stored in a clean and well-ventilated warehouse with an ambient temperature of -5°C +40°C, a relative humidity of not more than 70%, and the air must not contain corrosive gases and media that affect electrical insulation, and must not be affected by any mechanical Shock or heavy pressure. Not subject to direct sunlight, and the distance from the heat source (heating equipment, etc.) should not be less than 2m. Under the above storage conditions, the BMS protection board can be stored for one year.
Lithium Phosphate Battery Pack, 12V15Ah Life Po4 with BMS protection
This Lithium Phosphate Battery pack is constructed using high-quality 3.2V 15Ah cells, designed to deliver reliable and long-lasting power for various applications. Each cell provides a nominal voltage of 3.2 volts and a capacity of 15 amp-hours, ensuring a substantial energy reserve for devices that require consistent power over extended periods. The battery pack is typically configured in a series or parallel arrangement to meet the desired voltage and capacity specifications, making it suitable for applications such as electric vehicles (EVs), solar energy storage, and high-capacity power systems.
Incorporating advanced battery management systems (BMS), the pack ensures safe charging and discharging cycles, protects against overcharge, over-discharge, and short circuits, and optimizes performance and lifespan. With its high energy density and efficiency, this battery pack is a reliable solution for powering demanding systems while maintaining a lightweight and compact form factor.
100Ah 3.2V, PRISMATIC LITHIUM PHOSPHATE CELL- A GRADE (DIY BATTERY KIT) 4S 100Amp JBD BMS, BUSBAR, NUT
4 CELLS, JBD BMS 4S 100AMP, NUT, BUSBAR
A 3.2V 100Ah Lithium Iron Phosphate (LiFePO4) battery is a high-capacity energy storage solution commonly used in various applications, including renewable energy systems, electric vehicles, and other high-demand devices requiring a reliable and long-lasting power source.
Reviews
There are no reviews yet.